When your garage door fails to open and close properly, several things can be done to help remedy this. One of the first things you should do is check for a broken spring. If this isn’t the case, you should check to see if the cables connecting the tension spring are broken or if there is a problem with the photo eyes on the opener. Another possible cause of failure is a lock that is stuck or not working correctly.
Broken Torsion Spring
You cannot open and close your door if you have a broken torsion spring in your garage. This can be dangerous and a safety hazard for you and your family. It would help if you replaced the spring immediately.
The good news is that there are some ways to tell if your torsion spring is broken. A broken torsion spring makes a loud noise. It also has gaps between the coils. You can get a replacement spring online. You can also visit coastalgaragedoors.com to learn more about torsion spring replacement.
There are two main types of springs: torsion springs and extension springs. The former is above the tracks and is mounted on the sides. Both of these have their functions.
Torsion springs are typically used in more oversized garage doors. They are a three-pronged support system with a center-bearing plate. The wires connected to the springs should be tight when they are in a normal state.
Broken Cables Connecting the Tension Spring
If your garage door is having trouble opening or closing, a broken cable is a cause for concern. This can create a dangerous situation. It could strain the rollers or cause the door to snap.
You may have to reconnect the cables if you have torsion springs on your door. These cables can be challenging to work with. You’ll need to be careful and wear leather work gloves.
You’ll need to remove the old cable and the springs to replace a broken cable. You’ll also need a C-clamp and a pair of locking pliers.
After you’ve removed the broken cable and springs, you should measure the coils. You’ll need to know the wires’ diameter and the spring’s length. These measurements should be converted to decimals. If the spring is too short, it will break sooner.
Once you’ve measured the wires, you’ll need to take the old spring apart. You’ll want to use a measuring hook to measure the gap between the coils.
Broken Photo Eyes
If your garage door needs to be closed correctly, there’s a chance you aren’t alone. While it’s possible to fix the issue on your own, a technician can help you out more if you have a more complicated problem.
One of the more common reasons why your door won’t close is because of a photo-eye malfunction. These sensors are usually located at the bottom of the door tracks and are responsible for ensuring your garage door opens and closes correctly. They may be misaligned, dirty, or broken.
One of the easiest ways to fix this problem is to remove a small item from your way. Items like a garbage can, a pet, or a spider nest can interfere with the photo beam. Once you’ve removed the obstruction, your door should operate.
Another good idea is to clean your lens. If you last cleaned your sensor some time ago, it’s likely clogged with dust. You can remove the buildup with a damp rag.
Disengaging the Lock
If you are having trouble opening your garage door, there are a few things to look for. The first problem is that the door itself may have been locked. In this case, you will need to open the door manually.
Another reason your door may not work is that the opener has malfunctioned. Luckily, there are a few simple steps that you can take to fix this issue. For example, you can disconnect the cord that connects the opener to the motor. Alternatively, you can contact a professional for help.
A broken or disconnected garage lock is one of the most common causes of a door not working. Typically, this will have two horizontal bars to prevent the door from opening. You can unlock the door by pressing the lock button if you have an opener with a manual lock. If you need help unlocking your door, you can follow the instructions in the user guide.